TAG Turbo and active gauge controller

The TAG (Turbo & Active Gauge) controller is a small, compact, low cost pumping system Controller, which is suitable for a wide range of vacuum applications. It is a 24V controller that is compatible with all Edwards DX and nEXT turbopumps. It contains no power source and thus you either need to supply your own power or buy the optional power supply. In addition to a turbopump it can control a backing pump, a vent valve, an air cooler and an Edwards active gauge.
The TAG Controller is controlled by an easy to use interface. A large clear LED display shows the pump speed or vacuum pressure. The compact size of the controller is ideal for use on bench-tops or suitable mobile platforms.

Informacje

Features and Benefits

  •     Compatible with all Edwards 24V turbopumps enabling pump control and speed display
  •     Start/stop control of a backing pump for full system control (external relay may be required)
  •     Turbomolecular pump start options: start with backing pump, start after time delay or start at pressure set point
  •     Vent valve control options: controlled vent from full speed, vent from half speed or no vent
  •     Pressure display from a compatible active gauge in mbar, Torr or Pa
Dane techniczne
Max input Power 240W
Mains input  
  Electrical supply 24V d.c.
  Power consumption (max) 5W
Auxiliary terminals  
  Air cooling fan 24V d.c. 3.6W max
  Turbo pump 24V d.c. 160W max
Dimensions 96 x 48 x 165mm
Mass 0.3kg
Operating temp 0°C to 40°C
Storage temp -30°C to 70°C
Max ambient operating humidity 90% RH non-condensing at 40°C
Max operating altitude 2000 m
Enclosure rating IP20. IP40 when panel mounted.
Pliki do pobrania
Turbo & Active Gauge Controller datasheet